Skip to main content

Got Full Licence at the first driving test on 27 Feb 2007

On 27 Feb 2007, I got Full Licence at Five dock RTA.
It is 2 Months after I got my Learner Licence.
I practised to drive the car with HH at every weekend.
After I got learner licence, we drove to a friend's home at Bankstown.
Then we looked for some cheap furnitures at Parramatta.
At that time, we had to stop by police since I dont give way when I entered the main road. The police took the breath testing and taught me a warning. then let us go. huuuuuuuuuuuuum, breathed deeply from bottom of the lung. good luck!
Recalling my road to practise driving, a lot of mistake I made. Jaming the intersection, driving to a wrong direction, dont give way to the main road traffic, going through the red light, over speed limited, hit the light pole while reverse driving, hit the wall when reverse parking.
I can't list the every mistakes I made.
But I can feel the improvement following every practice.
So I feel more confident as the test coming.
I found one defect while driving. That is when I parked the gap between car and kerbside is too big. The regulation account the distance must be less than 40 CM. Our car without wide angle side mirror and I have no feeling to how big the car is and how can I put the car in the right distance. HH told me a good method to solve this problem: when I reverse parking, I can reverse then let one of the behind wheel touch the kerbside slightly and forward the car to adjust the angle of the header. So you can make the car close to the kerbside just off only 1-2 CM! What wonderful brain! This solution give me a little bit confident for reverse parking.

Comments

Popular posts from this blog

home routine dairy

handyman workshop fixed bosch dishwasher hinge cover took off the rusted laundry tap

How to remove Hyundai I30 radio

My car is Hyundai I30 (2011) I lost my radio security code then my radio didn't work since then. following instruction are how to remove central control panel, take off the radio and get radio S/N then calculate the radio security code: 1. open up the top glove box and remove the matt at the bottom.  You can see 4 screws, remove these 4 screws 2. pull the glove box toward yourself, to take off the box from central control panel. 3. then you can see another screw just below the yellow mark, unscrew it     You don't need to unscrew the 2 screw in the front.  4. pull the whole central panel toward yourself evenly, then you can get off the cental panel.   5. read the last 4 digis from the S/N: 0087 (see above photo)     plus 1212 equals 1299     then you get your radio security code: 1299 -- Photos shared with Fish Bowl Photo. http://www.pixiereef.com