Skip to main content

Honor 6 root guide for Marshmallow EMUI 4.0 with TWRP

By

Honor 6 root guide for Marshmallow EMUI 4.0 with TWRP


MARSHMALLOW has been officially released by Honor for Honor 6. It's time for us to root our devices. Follow the short procedure to root your Honor 6 in 5 minutes.

SUCCESSFULLY TESTED ON THE HONOR 6 RUNNING B822

Requirements:

  • Honor 6 with unlocked bootloader
  • Hi suite/usb drivers installed
  • Root files– Download

Step 1: Download Root file

Download root.7z from the above link and save it to your computer. Extract the file using 7zip.

Step 2: Normal configurations

Make sure you have installed hisuite or the appropriate usb drivers.

Make sure you have enabled usb debugging options from the developer mode

  • 1st step: Open Settings.
  • 2nd step: Find and choose About phone.
  • 3rd step: Locate Build number and click it for 6 to 8 times until a prompt informs you that developer mode has already been enabled.
  • Secondly, find and turn on USB debugging in Developer options.
  • 1st step: Go back to Settings.
  • 2nd step: Click Developer options in Settings.
  • 3rd step: Select USB debugging and choose OK in the pop-up window to confirm allowing USB debugging.

Step 2: Install TWRP

Connect your phone via usb cable

Open the root folder you will find "1 flashing twrp.bat" file double click on it

Your device will get into the fastboot mode and twrp recovery will be flashed.

*device will reboot automatically *

Step 3: Copying super user files

Inside the root folder you will find one more folder named as "su"

open the su folder and copy "flash this first.zip" and "flash this second.zip"  to the root of you  internal memory.

No need to extract the zip files

Step 4: Reboot to recovery

Open the root folder you will find "2 reboot recovery.bat" file double click on it

Your device will get into the recovery mode .

Step 4: Flashing both the zip files

Just swipe to enter into the twrp recovery menu

click on "INSTALL" locate the copied "flash this first.zip" file then click on it

Swipe to install

It will start the flashing

Click reboot.

In the same manner flash "flash this second.zip"

 

Congrats you have successfully rooted your phone 🙂

 

Additional Step: If you wish to flash the stock revocery in order to install ota updates then

Open the root folder you will find "3 stock recovery.bat" file double click on it

Your device will get into the fastboot mode and stock recovery will be flashed.

*device will reboot automatically *

Comments

Post a Comment

Popular posts from this blog

home routine dairy

By
handyman workshop fixed bosch dishwasher hinge cover took off the rusted laundry tap
Post a Comment
Read more

How to remove Hyundai I30 radio

By
My car is Hyundai I30 (2011) I lost my radio security code then my radio didn't work since then. following instruction are how to remove central control panel, take off the radio and get radio S/N then calculate the radio security code: 1. open up the top glove box and remove the matt at the bottom.  You can see 4 screws, remove these 4 screws 2. pull the glove box toward yourself, to take off the box from central control panel. 3. then you can see another screw just below the yellow mark, unscrew it     You don't need to unscrew the 2 screw in the front.  4. pull the whole central panel toward yourself evenly, then you can get off the cental panel.   5. read the last 4 digis from the S/N: 0087 (see above photo)     plus 1212 equals 1299     then you get your radio security code: 1299 -- Photos shared with Fish Bowl Photo. http://www.pixiereef.com
Post a Comment
Read more